Dense Phase Pneumatic Denseveyor Simplicity is the most recognizable feature of the Denseveyor design. With most applications, level probes and outlet valves are not required to be mounted within the pressure vessel since the vessel closing device, Macawber’s patented Dome Valve, is purpose-designed to close and seal through a static or dynamic column of material. The special relationship between vessel capacity and pipeline insures the movement of material without dependence on material fluidization,pipeline boosters or high velocity.
Smooth, low-velocity dense-phase pneumatic conveying of powders, granules and irregularly shaped materials without degradation or segregation. Hot, wet, fine or coarse, blended or batched Denseveyor handles them all. Phase Density Two important features of the Denseveyor design combine to provide a non- fluidizing conveying technique which in turn reduces air requirements, and therefore, establishes a high phase density normally between 30 and 150, depending on material and application objectives.
Patented Dome Valve:
The vessel valve is purpose-designed to provide a high degree of reliability – up to 500,000 cycles between inspections in approved applications – even when operating with abrasive materials such as sands and ash or coke fines. More than 5,000 Dome Valves are operating throughout the world on heavy-duty pressure sealing and flow control, as well as shut-off applications. The reliability of the Dome Valve sets the Denseveyor apart from systems of inferior design.
The unique low-velocity, nonfluidizing principle of the Denseveyor insures low velocity control of the bulk material. Since internal pipewear increases by the square of material velocity, a considerable reduction in pipewear is possible with the Denseveyor system even with the most abrasive materials.
Low conveying velocity Minimum material & pipe abrasion Low power consumption
We are an eminent name occupied in offering premium quality Pneumatic Denseveyor to our esteemed clients. The well-proven Denseveyor is a low velocity dense-phase conveying system assembly that is widely used throughout all process industries. Our Denseveyor systems offered by us are ultimate solutions for the handling of difficult-to-convey materials; hot, abrasive & wet materials. These are also used for providing gentle handling of products that helps in preventing degradation of friable materials/ separation of blended materials. Features:
Low conveying velocity Minimum material & pipe abrasion Low power consumption Low air consumption
Supported by team of deft professionals, we are occupied in offering premium quality Pneumatic Conveying Denseveyor to our precious clients. Its precision construction standards make it perfect conveying system for handling difficult-to-convey materials including abrasive, hot and/or wet. Our offered product has developed an enviable reputation as the most efficient, reliable and clean method of conveying. We provide this range in several specifications keeping in mind the needs of customers. Features: